NANO4-GROUT
It’s never fun having to waste your weekend cleaning all the nasty bacteria and mould build-up in your bathroom.
Nano4-Grout is a nano grout sealer is a non-toxic protective coating that penetrates, seals and protects the grout especially in your bathroom and keeping it clean and healthy.
Where can I apply it?
- Bathroom grout
- Kitchen grout
- Any grout surfaces
- Any natural porous stones or tiles
Why choose Nano4-Grout over other products?
Safer – Our odourless water-based penetrating sealer is 100% natural eco-friendly formula reducing the health risks for Australian families when compared to other products on the market.
Greener – Our product is made of quartz sand also known as liquid glass. The natural ingredients are formulated with the environment in mind, therefore supporting efforts to make our planet a sustainable one.
Smarter – Nano4-Grout is quick and easy to apply. Saving you many hours of scrubbing the mould in your bathroom. It’s design to reduce up to 90% of cleaning chemical usage and avoiding it from going into our water stream and harming our environment.
Other features and benefits
- Non-toxic
- Invisible coating
- Odourless
- Reduce moss & fungi growth
- Curing time 24 – 48 hours
- Protection up to 5 years
PRODUCTS SIZE |
COVERAGE |
EXAMPLE ITEMS TO SEAL AND PROTECT |
---|---|---|
200ml Bottle |
1m2 – 7m2 |
1 average size bathroom grout |
500ml Bottle |
2.5m2 – 16m2 |
2 average size bathroom grout |
1 Litre Bottle |
5m2 – 33m2 |
4 average size bathroom grout or kitchen and laundry |
4 Litre Bottle |
20m2 – 132m2 |
Grout inside an average size house |
EASY TO APPLY
STEP 1. We recommend doing a test on a small area first; allow it to cure for 24 – 48 hours to determine the desired results.
STEP 2. Before you apply, make sure the surface if clean, dry and free of residues.
Do not dilute Nano4-Grout with water, as it is not required.
STEP 3. Pour Nano4-Grout into a clean plastic container and use a brush for the most economical application to apply on the grout as spraying may waste the liquid. Apply 2 coats (wet to wet). Apply the 2nd coat before the 1st coat dries while it’s still wet – usually within 3 – 5 minutes. Once completed, use a cloth and wipe off any excess residue off tiles. Let it dry for 24 – 48 hours before allowing contact with water.
Nano4-Grout offers a long life protection of up to 5 years for new surface and when applied correctly according to instructions and maintained according to Nano4Life’s maintenance guide.
However, you may need to re-apply earlier depending on the usage and for optimum results.
TIPS
- For the best results apply generously on the surface and make sure the coatings are wet
- Avoid using the shower of the treated grout and use a second shower if possible to allow the treated surface to cure within the desired time frame (24 – 48 hours)
- Once applied in the bathroom, leave the doors and windows open for better ventilation to assist in the curing process
- If you’re unsure please visit www.nano4life.com.au for our application video or contact us.
PRECAUTIONS – DO NOT SWALLOW
- Apply when surface temperature is between 5 – 30OC
- Avoid moisture contact with the surface after application until fully cured for 24 – 48 hours for optimum results
- Wear gloves and protective clothing
- Wash hands after application
- Store in a cool and dry location away from direct sunlight
- Keep out of reach of children
- PH Value 14 or above cleaner can destroy the effect
- Nano4-Grout does not protect against etching, wear and high water pressure 50 bar and above
CHEMICAL COMPOSITION
Demineralised Water (H2O) >94%
Silicon Dioxide (SiO2) <6%